PRODUCT CENTER
Stainless steel bars with an I-shaped cross-section and a 1:6 inclination on the inner surface of the flanges, being thinner on the outside and thicker on the inside, exhibit excellent corrosion resistance, oxidation resistance, and bending strength, making them suitable for load-bearing structures in corrosive environments.
Carbon steel equal angle steel
Carbon structural steel hot-rolled L-shaped section steel with equal sides, equal thickness and length on both sides, economical and reasonable cross-section, good weldability and plasticity, is the most basic and general-purpose steel profile for steel structures.
Carbon steel unequal angle steel
Hot-rolled carbon structural steel with unequal side length L-shaped cross-sections, where the long and short sides are of equal thickness, can provide stiffness in different directions and is suitable for structural connections under asymmetrical forces.
Hot-dip galvanized C-shaped cold-formed steel sections are made by directly forming galvanized steel strips or by hot-dip galvanizing after forming.
H-section steel, hot-rolled from carbon structural steel, features wide flanges, thin web, and a large section modulus, exhibiting excellent bending and torsional resistance.
Hot-rolled carbon structural steel I-beams, with flanges that are thinner on the outside and thicker on the inside, have a reasonable section modulus and excellent bending resistance.
Corrosion-resistant carbon steel equal angle steel profiles with hot-dip galvanized surface treatment combine the structural support capacity of angle steel with the comprehensive corrosion protection of zinc coating, resulting in an outdoor service life 3-5 times longer than that of ordinary carbon steel.
Galvanized unequal angle steel
This corrosion-resistant carbon steel unequal angle steel profile, treated with hot-dip galvanization, combines the asymmetric stiffness of unequal angle steel with the corrosion resistance of galvanization, making it suitable for outdoor asymmetric load-bearing structures.
Stainless steel C-channel steel
C-shaped profiles formed from stainless steel strip by cold roll forming, with rolled flanges, combine the corrosion resistance of stainless steel with the lightweight and high strength of C-shaped steel, making them suitable for light steel construction in corrosive environments.
ASTM A656/S355J2 is a high-strength low-alloy structural carbon steel coil, produced using a thermomechanical controlled process (TMCP) with the addition of microalloying elements such as vanadium and niobium.
Carbon steel I-beams, after hot-dip galvanizing, are corrosion-resistant steels that combine the structural bending resistance of I-beams with the comprehensive corrosion protection of a zinc coating.
A514 is a quenched and tempered high-strength low-alloy structural steel with a minimum yield strength of 690MPa (100ksi).
GET A FREE QUOTE
Contact Us
No.9, South Nenjiang Road, East Taishan Road, Jiangguantun Sub-district, Liaocheng Economic & Technological Development Zone, Liaocheng City, Shandong Province, P.R.China
