PRODUCT CENTER
CGO Conventional Electrical Steel M3/M4/M5/M6
The main application field of grain-oriented electrical sheet is the iron core of power and distribution (distribution) transformers. In addition, they are also used in the production of: current transformers, voltage transformers, medium and large high-efficiency generators, reactors, magnetic screens, wound cores, audio transformers, etc.
Cold Rolled Non-oriented Silicon Steel For Magnetic Switch
Non-oriented silicon steel is used in rotating equipment such as motors. It is divided into iron core and rotor. In order to be easily magnetized during the rotation process, electrical energy is converted into mechanical energy. Therefore, it is required to be easily magnetized at every angle in the rotation process, so the grain orientation distribution in the non-oriented silicon steel is required to be uniform.
Cold Rolled Non-oriented Silicon Steel Electrical Steel
The products are usually cold-rolled plates or strips with nominal thicknesses of 0.35 and 0.5mm, which are mainly used to manufacture motors and generators.
Cold Rolled Non-oriented Low Carbon Electrical Steel
Non-oriented electrical steel is mainly used as the iron core of large and medium-sized motors, generators, household motors and micro-motors, ballasts and small transformers. The main magnetic performance requirements of non-oriented electrical steel are low specific total loss and high magnetic polarization. The low specific total loss can save a lot of electric energy and extend the working time of the motor. High magnetic polarization means that the magnetization ability is strong, the excitation current of the iron core is reduced, and the specific total loss and iron loss are reduced.
Cold Rolled Grain Oriented Silicon Steel Strip
Grain-oriented silicon steel strip, also known as cold-rolled silicon steel strip for telecommunications, is used in the manufacture of various power transformers, pulse transformers, magnetic amplifiers, converters and other cores with a working frequency of 400Hz or more.
Cold Rolled Ordinary Oriented Silicon Steel
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in transformer (core) manufacturing industry. The most widely used oriented silicon steel is supplied in the form of a coil, and its surface is coated with an insulating layer to generate tensile stress in the base steel strip, thus further reducing the iron loss value. The cold-rolled strip has a smooth surface, good punching performance and high core filling factor.
Tin Free Steel (TFS) is produced by applying electrolytic chromic acid treatment over steel sheets. This steel product was developed to meet economic requirements, and excels tinplate in paintability, paint adhesion, and economy. It is widely used for making beverage cans and 18-liter cans.
Electrolytic Tinplate (ETP) Coil
ETP (Electrolytic Tinplate). Low carbon steel coated with tin with a layer between them of steel-tin alloy and destined to be used mainly in the production of metal cans. Tin provides good weldability and electrical conductivity, as well as high corrosion resistance.
Double Reduced Cold Rolled Tinplate Coil
Double reduced product is given a partial cold reduction to reach an intermediate gauge, then annealed and given another cold reduction to the final gauge prior to coating with tin. The resulting product is stiffer, harder, and stronger than single reduced, in some cases, allowing customers to utilize lighter gauge steel in their application.
Single Reduced Cold Rolled Tinplate Coil
Single reduced product is cold rolled to the finished gauge, then continuously annealed and coated with a thin layer of tin.
Tin Free Steel (TFS) is produced by applying electrolytic chromic acid treatment over steel sheets. This steel product was developed to meet economic requirements, and excels tinplate in paintability, paint adhesion, and economy. It is widely used for making beverage cans and 18-liter cans.
ETP (Electrolytic Tinplate). Low carbon steel coated with tin with a layer between them of steel-tin alloy and destined to be used mainly in the production of metal cans. Tin provides good weldability and electrical conductivity, as well as high corrosion resistance.
GET A FREE QUOTE
Contact Us
No.9, South Nenjiang Road, East Taishan Road, Jiangguantun Sub-district, Liaocheng Economic & Technological Development Zone, Liaocheng City, Shandong Province, P.R.China
