PRODUCT CENTER
AZ55 aluminum zinc plated steel coil is coated with 55% aluminum zinc alloy by hot dip plating process. It has excellent corrosion resistance and can be used in various applications, such as the automotive industry, shipbuilding industry, construction industry, etc. In addition to being an excellent outdoor material, AZ55 aluminized zinc steel coil also has many other advantages. For example, it can be used for electrical equipment manufacturing or decoration, such as fences. In addition to these uses, this steel can also be used in various industrial applications because of its good mechanical properties and corrosion resistance.
EN10025-2 S235/S275/S355 carbon steel coils
EN10025-2 S235/S275/S355 are European standard non-alloy structural carbon steel coils.
ASTM A615 Concrete Rebar Grade 40
A615 grade 40 steel adds the most benefit when building materials must hold concrete in compression. Strength is one of the differentiators for these two rebar grades. The minimum tensile strength for A615 grade 40 steel is 70.05 ksi. It has a minimum yield strength of 40 ksi.
Galvanized zinc coil is based on cold-rolled steel plate, which is solidified by 55% aluminum, 43.4 zinc and 1.6 silicon at 600 ℃. It combines the physical protection and high durability of aluminum with the electrochemical protection of zinc. Also known as aluminized zinc steel coil.
202 austenitic stainless steel sheet contains manganese-nickel-chromium alloy, has good formability and better corrosion resistance than 201, and is suitable for kitchenware, decoration and building hardware.
301 grade stainless steel is a common austenitic stainless steel with good corrosion resistance and high carbon content, and can be cold worked to various temperatures. Among stainless steels, 301 is the most easily strengthened steel by cold deformation. Cold deformation processing can improve the strength and hardness of steel, and retain sufficient plasticity and toughness. In addition, this steel has good rust resistance under atmospheric conditions, but its corrosion resistance in reducing media is poor, and its corrosion resistance in chemical media such as acid, alkali and salt is poor. Therefore, it is not recommended for corrosive environments.
A588 is a high-strength low-alloy weathering steel (Corton steel) with a minimum yield strength of 345MPa.
A633 is a normalized high-strength low-alloy structural steel.
A656/S355J2 carbon steel plate
A656/S355J2 is a high-strength low-alloy structural steel produced by thermomechanical control process (TMCP).
A709/S355 J0W carbon steel plate
A709/S355 J0W is a weathering structural steel for bridges with a minimum yield strength of 355MPa.
GB/T700 and GB/T1591 national standard materials for carbon steel plates
GB/T700 is the standard for carbon structural steel, and GB/T1591 is the standard for low-alloy high-strength structural steel.
EN10025-2 S235/S275/S355 carbon steel plate
EN10025-2 is the European standard for hot-rolled structural steel.
GET A FREE QUOTE
Contact Us
No.9, South Nenjiang Road, East Taishan Road, Jiangguantun Sub-district, Liaocheng Economic & Technological Development Zone, Liaocheng City, Shandong Province, P.R.China
